I have a smok nord 2 cabins health for the purposes of this review.



SMOK Nfix Kit 25W three colors:

– chromium PRISM
– Black
– red
– Gold Prism

Smok-g mod interlocking 3 specification

– Size: 54 x 28 x 85 mm
– Chip: IQ-G chipset
– Operation: VW (standard soft, hard, Max) / TC (NI, IT, SS, TCR, heat) / Mode I
– Range Power: 1 W-230W (VW) / 10-230W (TC)
– Input voltage: 6.4V 8.4V-
– Output voltage: 0.5V-8.2V
– Battery: two 18650 cells
– Cooking time: 0.001s
– Loading port: Type C
– Charging voltage: 5V
– Charging Current: 2.0A
– Standby current: <400uA
– Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)
– Temperature: 200 ° F-600 ° F / 100 ° C-315 ° C
– Display: 2.4 inch touch screen


Smok tank tfv16 Lite Specifications:


– Size: 24 x 58.5mm
– capacity: 5 ml
– Filling: Refill Top System
– Material: Stainless steel
– Coils: conical coil Lite Mesh TFV16 better: 60-75W; TFV16 Lite mesh 0.15ohm dual voice coil, better: 60-90W
– Re: gold plating over 510

TFV Smok lite 16 is 24mm and height 58.5mm this atomizer. With the atomizer is in the package, you will receive two tanks bubbles and receive two coils.
atomizer good build quality, the yarn is fine and everything is as it should be. Previously, you could see atomizer “Smok” and the bottom of the atomizer can see the “Designed by Smok”.

Using spray is RPM80 Pro and the spray nozzle standard pre-installed is not compatible with the advice 510 or 810 drops would be a disadvantage for some people. Leakage is acceptable to use in my opinion.

when the button is pressed, it can push the envelope and see the hole filling. Fill a large void and have no problem to fill the tank. No leakage when the tank is filled.

Sprayer tank is equipped with glass bubbles and bubble package is installed, you receive the replacement glass tank. glass tank with a capacity of 5 ml capacity of large bubbles in my opinion. If desired, you can buy in the release of 2 ml atomizer. I like a glass bubble and I like capabilities.

With the atomizer, you receive two coils. A coil is pre-installed and the other is in the box. Integrated coil tfv16 Lite mesh coil and cone 60-75w work best, 0.2ohm coil resistance. Receiving coils in the package is a double mesh tfv16 Lite coil and has the best resistance and 0.15ohm 60-90w work. Really you can easily replace the atomizer coil you need is out of the coil and the pulse in other places, it is very simple and easy. In coils, you can see the lines etched so I could know when to fill up the tank, which is good. It is used the first time the coil you need to start with a few drops of liquid E and can put a coil in the tank and fill the tank.

In the air flow control dial, you can see that the air flows both places. In the air flow control dial, you can see some details that help to regulate the air flow and the part to be adjusted, will be the same on the other side. You can easily adjust the air flow to the atomizer.

How does it work? Atomizer and my mind:

Atomizer build quiality I received was good, everything worked fine and the correct cable. With the atomizer, you receive two rollers and two bubble glass tank really good in my opinion. Smok also receive standard installed drip and spray nozzle is not compatible with 510 or 810 drops suggestion would be an idiot. Top filling with good and had no problems whatsoever, fill a large gap and can fill up quickly and easily. Capacity is very good in my opinion and I think a lot of capacity will 5ml. Using the spray, which received two rollers, one coil and other network dual bobbin thread. I tried the coil mesh and decent work, good taste, but I like the coil tank Tf better, and also provide a good flavor and excellent vapor production, this powerful steam. Given all very busy aerosol that can be treated.



– It is compatible with the 510 or 810 drip tips



– The build quality is good
– facilitate the charging system
– capacity 5 ml
– Two glass bubble tanks
– Two coils
– The good taste
– dense vapor and steam production
– Easy to replace the coil
– Easy to adjust the flow of air

smok mag mod:

Smok g priv mod 3 that feeds two 18650 and the object of this mod 1-230w formed. Mod dimensions of 54 mm x 28 mm x 85 mm. mod construction quality is very good and no complaints. I really like the design of mod, modern look very nice in my opinion, and you can buy this mod in 4 different colors. Mod does not have sharp edges and mod is very comfortable to use. You can also see some details about the mod, mod before, you can see “Smok” and behind the mod, you can see the “G-3 PRIV” with little information.

On the upper side of the mod, you can see the connection thread here was good and I had no problem pin, silver and gold spring. This mod, can be used up to 25 mm without false atomizers.


On the back side of the mod, you can see the battery cover and, as said device is powered by two batteries 18650. The remnants of the battery cover in place because of the magnet and the remains of the two situations are not played so well this. At the bottom of the deck, you can see a small slot so that you can pull nails. If the battery cover is removed, you can see the battery orientation in painted and we also have a band here so you can make the most simple battery. When the battery is inserted into the mod and mod when there is not very good sizzling stir.


Sub mod can see the ventilation slots and a USB port c.
You can use the USB port for software updates and can be used to recharge the battery to load additional device balanced. As usual, I recommend recharging your batteries in an external charger.

On one side of the mod, you can see the shutter button. shutter button on the device is very large and dislocation, it works very well. I like the shutter button and I think it is very convenient to use. On top of the shutter button, you can see another button is used to turn on / off screen and lock / unlock the screen.

On the front you can see the touch screen mod is really, really big screen, 2.4inch screen size. I think this is a beautiful screen and the brightness of the screen is good.

To activate it you have to click the shutter button 5 times and must do the same to turn it off. When the power supply mode activated will appear on the screen:

– I can not
– locking / unlocking
– The battery indicator
– Heat
– W
– Time puff
– Left and right
– coil resistance
– V
– to blow


Thus, on the screen, we have all the necessary information and this is a big high definition screen with good brightness, because you can see everything that is good on the screen. The touch screen works very well and had no problems whatsoever so far.
At the entrance to the menu, you can see:

– Modus
– My style
– Hojaldre
– Setting

When the selected mode, where you can see:

– Vw
Heat soft, standard, robust, max

– Tc
Ingredients: o, ti, ss


If you choose me mode, you can set up four different operating modes, you can select a rule, the heating fluid and can be written and NIC.
The choice of the breath of the breath, you can rearrange the tables and can set the maximum strength.
If you choose the settings you can see:

– General (approximately factory reset, accessibility, food)
– Chip (Info)
– Theme (you can choose the color and screen timeout)
– Access codes



How do these devices work and my thoughts:


Thus, on the screen, we have all the necessary information and this is a big high definition screen with good brightness, because you can see everything that is good on the screen. The touch screen works very well and had no problems so far.
At the entrance to the menu, you can see:

G 3 PRIV is my opinion that another mod is very nice with smok trinity alpha

, Mod Build quality is very good and everything is as it should be, feels very solid in the hand model. Mod has no sharp edges and convenient to use in my opinion. I like the shutter button and the shutter button in my opinion is very convenient to use, run smoothly for now. This mod, you can use up to 25 mm in diameter without atomizers false. This mod is a fingerprint magnet would be a disadvantage for some people. USB port and balance mod support costs c much needed, but as usual, I recommend using an external charger. Here the screen is very good, is the display size of 2.4-inch touch screen and works very well, I have not had any problems so far. The screen brightness is also very nice and the screen, we have a lot of information. We also have some interesting options here, we have the access code and can choose the color on the screen.
At the top of the shutter button, is a button that is used to lock / unlock the screen and enable / disable screen. The battery cover is still perfectly in place and not play here, which is very good.
Mod is now well and had no problem with this mod.
I really like this mod mod and work largely without problems so far, so I can recommend this mod if you want to buy a mod touch screen.



– fingerprint magnet


– Quality of building a good mod
– I like mod design
– comfortable to use
– button above the shutter button
– I like the shutter button
– touch screen HD 2.4 inch
– Good display brightness
– Much of the information on the screen
– Easy to use
– The touch screen works well
– You can change the colors on the screen
– balanced load
– Battey makes the perfect cover in place
– My selection method
– Access codes
– No ring
– the tape so you can easily remove the battery


health cabin thanks

You can buy the here: smok vape